top of page

GLAZING INSTRUCTIONS

Anker 1

PURE TECHNOLOGY 3

pure technology 3.JPG

PURE TECHNOLOGY

pure technology.JPG

PURE TECHNOLOGY 3

Ãœbersicht_Werkzeuge.jpg
Übersicht_Scheibe_2_Löcher.jpg
2 holes

VERY IMPORTANT:

1)   1,0 mm drill

2)   1,5 mm ball-head drill

3)   60° countersink

4)   Special FLAIR Nylon

6)   1,8 mm minimal edge thickness

Schritt_1.jpg
1,8 mm minimal edge thickness
DRILL

Step 1

CNC: Use 1.0 mm drill.

​

Less Stress: Use 1.0 mm drill. FLAIR art. 60038

​

By hand: Use the „pure“ drilling jig. FLAIR art. 60057.

Drill the two outer holes with the 0.9 mm drill.
FLAIR art. 60020.

Schritt_2.jpg
∅ 1,5 mm ball-head drill
(FLAIR Art. 60021)

Step 2

Drill the outer drill hole on the inside so deeply, that the ball head is flush.

Schritt_3.jpg
60° countersink (FLAIR Art. 60035)

Step 3

Deburr all drill holes with the 60° countersink.

​

Use the countersink in order to nasally sink the inner drill hole B somewhat more than the other holes, to ensure a perfect fit of the nosebridge.

Schritt_4.jpg
∅ 0,4 mm FLAIR Nylon
(FLAIR Art. 326029)

Step 4

Double the nylon thread and guide it through the drill hole A from the inside. Turn the loop inwards and fix it with your finger on the lens.

Schritt_5.jpg

Step 5

Lead back the threads through the same hole.

Schritt_6.jpg

Step 6

For further assembly, it is advisable to turn the threads by 180 degrees, so that the loop is on the outside.

Schritt_7.jpg

Step 7

Insert the edge/bridge. Tighten each thread individually with the pliers.

Schritt_8.jpg

Step 8

Knot with simple knots. Tighten. The knots disappear in the countersink.

Schritt_9.jpg
Pliers for nylon threads or
„pure“ precision pliers

Step 9

Cut off excess threads.

Schritt_10.jpg

Step 10

The desired result.

pure technology 3
pure technology

PURE TECHNOLOGY

Ãœbersicht_Werkzeuge.jpg
Übersicht_Scheibe_3_Löcher.jpg
3 holes

VERY IMPORTANT:

1)   0,9 mm drill

2)   1,4 mm ball-head drill

3)   60° countersink

4)   Special FLAIR Nylon

5)   All holes 0.9 mm. Never bigger!

6)   1,8 mm minimal edge thickness

Schritt_1.jpg
DRILL

Step 1

Use 0.8 mm drill to create 0.9 mm hole. Drill available from the machine supplier.

​

Less Stress: Use 0.9 mm drill. FLAIR art. 60037

​

By hand: Use 0.9 mm drill. FLAIR art. 60020. Use the „pure“ drilling jig. FLAIR art. 60057

1,8 mm minimal edge thickness
Schritt_2.jpg
∅ 1,4 mm ball-head drill
(FLAIR Art. 60021)

Step 2

Drill the middle hole on the inside so deeply, that the ball head is flush.

∅ 0,4 mm FLAIR Nylon
(FLAIR Art. 326029)
Schritt_3.jpg
60° countersink
(FLAIR Art. 60035)

Step 3

Deburr all drill holes with the 60° countersink

Schritt_4.jpg

Step 4

Guide the doubled thread from the inside through hole A and crossed back through hole B.

Schritt_5.jpg

Step 5

Insert the edge/bridge. Tighten each thread individually with the pliers.

Schritt_6.jpg
Before knotting push the lateral thread on the edge/bridge very close to the glass edge!

Step 6

Knot with simple knots.

Schritt_7.jpg

Step 7

Tighten. The knot disappears in the countersink.

Schritt_8.jpg
Pliers for nylon threads or
„pure“ precision pliers

Step 8

Cut off excess threads.

Schritt_9.jpg

Step 9

The desired result.

FLAIR on Instagram

Ãœbersicht_Werkzeuge.jpg
Übersicht_Scheibe_3_Löcher.jpg
3 holes

VERY IMPORTANT:

1)   0,9 mm drill

2)   1,4 mm ball-head drill

3)   60° countersink

4)   Special FLAIR Nylon

5)   All holes 0.9 mm. Never bigger!

6)   1,8 mm minimal edge thickness

Ãœbersicht_Werkzeuge.jpg
Übersicht_Scheibe_2_Löcher.jpg
2 holes

VERY IMPORTANT:

1)   1,0 mm drill

2)   1,5 mm ball-head drill

3)   60° countersink

4)   Special FLAIR Nylon

6)   1,8 mm minimal edge thickness

  • Facebook
  • Instagram
  • YouTube

Home

bottom of page